Here are five carpet cleaning methods and what they really are.
Carpet cleaning can be one of the most feared household tasks. This activity normally involves a great deal effort to perform the cleaning process. It is no surprise that individuals and families often tend to hold off on cleaning their carpets. This should not be the situation. A very well kept up carpet typically lasts longer, promotes better human health and is stylishly pleasing to the eye. Cleaning them routinely is important to remove soils that could potentially even make us sick. The following are some carpet cleaning methods that are more commonly known in the cleaning industry.
1. Hot Water Extraction cleaning ( HWE )
The hot water extraction cleaning technique that uses hot water and cleaning agents to perform a flushing out of your carpet fibers. This flushing and extraction method works to remove soils, water and the cleaning agents used in this cleaning process. Many carpet manufacturers recommend the use of hot water extraction (HWE) as the best of the carpet cleaning methods.
This is one of the cheapest strategies of the carpet cleaning methods, but it can be one of the most troublesome. This method can make you more tired or worn out because it requires a considerable amount of hard work.
Chemicals utilized as a part of this cleaning procedure are called polymers. The polymers when applied to the surface of the carpet encapsulate and surround or engulf the dirt, soil particles, and buildups present in the carpet. After a short time, the encapsulated dirt can now be removed by the use of a vacuum cleaner. This method is the most well-known method in dry cleaning carpets since it keeps the carpet clean for a longer period and the carpet can be utilized instantly after cleaning is done.
4. Bonnet cleaning
This is also a dry method of cleaning carpets. A special cleaning solution is applied to a cushion, known as a bonnet, that is attached to a rotating machine. This machine is then used on the surface of the carpet to be cleaned. The rotating movement brings dirt out of the carpet and into the bonnet. Also, a vacuum cleaner is later used to remove the separated dirt.
5. Absorbent Compound Cleaning
In this procedure, the cleaning compound is brushed to the surface of the carpet, and the dirt follows into it. Subsequent to allowing it to dry for a couple of minutes, a vacuum cleaner is utilized to remove the compound and soils. You can see that most of the dry methods in cleaning carpets require the use of a vacuum cleaner. The capability of vacuum cleaners to beat the carpet fibers and suck the dirt from the carpet is very important in removing remove the isolated soils.
Various techniques and enhanced cleaning solutions were created all through the years to make carpet cleaning methods a less tedious task. Discover a reasonable procedure that works for you and your budget. Remember, though, that hot water extraction (HWE) is the method that is recommended by most carpet manufacturers, if not all.
If you are in the Milwaukee or Waukesha, Wisconsin area you could call Happy Day Carpet Care for professional carpet cleaning service. We offer FREE ESTIMATES and even FREE ADVICE. The phone number to call is 262-313-7979.
If you are new to our service, please check out our coupon page at https://happydaycarpetcare.com/coupons .
This blog post was written by Allie H. and Patrick Bautch